Shed
and Fence Care Treatment gives you a long lasting
decorative
protection to rough sawn garden wood.
Harmless
to plants and pets
Greater
coverage than creosote
Water
Based
Quick
Drying
Low
Odour
Coverage
6
sq.m. per litre (1 coat)
Refer
to can for full details.
Sizes
5
Litre, 6 Litre and 7.5 Litre
For
use on rough sawn garden wood; Fences, Sheds, Gates, Trellis.
Where to Use
For
use on rough sawn garden wood including wood which has been
pre-treated.
Not
suitable for smooth or planed wood, decking or garden furniture.
Preparing the Job
For best results, the wood
should be surface dry. Remove dirt, algae, lichen, fungi
or moss using a stiff brush. Use a suitable preserver
for protection against rot and decay, particularly for wood
in ground contact.
How to Apply
Stir
well before and during use. Brush on evenly along the
grain to cover the wood, alternatively use a spray.
One
coat is normally sufficient, but two or three may be applied
for a deeper colour. Do not apply in temperatures below
5°C or if rain is likely before product is fully dry.
Drying Time
Drying time 2-6 hours, ensure
previous coat is dry before re-coating. NOTE:
The drying time will vary depending upon weather conditions.
Cleaning Equipment
Re-seal
container after use. Remove as much product as possible
from brushes before washing with soapy water. |